Self-powered Home Smart Wireless Doorbell 150M Remote No Battery Button Waterproof US EU UK AU Plug Receiver Call Ring Bell
Features
Button is Waterproof, Don't worry about extended use.
The wireless doorbell offers a wide selection of 60 melodies and 5 volume levels to meet your needs for different occasions. Flashing light with audio alert indicators which is easy for people including the hearing impaired to notice.
Operating range up to 500ft / 150m in open area, ensures you to hear and answer the doorbell in time. You will never miss a visitor even if you are a few rooms away or on another floor
Easy to install with the double side adhesive tape or the screws.
The button has no screw chuck design, and it can be waterproof and dustproof without rubber ring.Works between -4 °F to 140 °F; withstands various harsh weather conditions
The button supports up to 6PCS, and the receiver supports up to 100pcs.
If multiple buttons are paired with one or more receivers in the same system, each button can be set to a different ringtone.
Power-off memory function: Turn the power on again after power off, no need to re-adjust and lock the ringtone.
Transmitter requires no battery (self-generating).Receiver voltage: 110-220-240V.
Easy to install.Just plug the receiver into power socket and attach the transmitter on door,
you don`t even necessarily have to make holes or damage anything
Please check the socket type before choosing the power plug. Our wireless doorbell receivers have EU/US/UK plugs and AU adapters to choose from
All products purchased in this store are shipped within 24 hours.
How to modify and lock music?
Press and hold the volume button of the receiver before plugging in the power socket. Plug in the power socket until the light of the receiver lights up, release the volume button, press the music button to adjust to the favorite music ringtone, press and hold the volume button again until When the light is on, press the transmitter twice immediately and the music is locked successfully.
How to pair signals
Pairing method: press and hold the volume button on the receiver for about 5 seconds (the light is on), release the volume button, then press the button immediately, the signal is successfully paired.
